KITACO is a brand that releases a wide variety of items mainly of 4MINI parts. They release many products essential for exhaust gasket and others of almost all vehicles.
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
About quality and texture - Excellent quality, made to OEM specs but just stronger.
About the feeling of use - So much better feel and bite now with these installed, almost feels like a big bike.
Pr...
About quality and texture - Excellent quality, the manufacturing of this part is perfect and looks beautiful.
About the feeling of use - I can not feel a difference from this part alone but it is req...
About quality and texture - This kit from Kitaco is top quality, the finish of the parts are so much nicer the the OEM one.
About the feeling of use - Clutch operations now feel stronger, a must for ...
I installed it on my Monkey03. The N is now plunging from first gear. I think the cost effectiveness is very good. Once you get the hang of the split pin, anyone can do it.
I used to use it before K &N.It's not bad. It's better than a bad Filter.The intake air volume will be increased and the power will be increased.Carburetor setting is required, though.good pointThe ca...
I used to use another Manufacturer, but it broke, so I bought this one. I feel it is easy to kick.
This piston pin is a good low cost replacement for the stock OEM Honda piston pin. When replacing the piston in your motorcycle consider this for a replacement, it is a cost efficient replacement.
I purchased to replace the stock piston pin in my bike during an complete engine rebuild. The quality of the construction is a vast improvement over the stock pin. I recommend this piston pin over sto...
I purchased to replace the stock chain in my bike during an complete engine rebuild. The quality of the construction is a vast improvement over the stock chain. I recommend this chain over stock bec...
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 | |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
About quality and texture - Excellent quality hand tool, good sized plastic handle that fits well in the hand.
About the feeling of use - Nice flexible shaft and strong magnet for picking up screws a...
About quality and texture - Excellent quality, hard plastic surround with rubber base is strong and durable.
About the feeling of use - I find this magnetic dish very handy when pulling apart compone...
It is used for Engine overhaul of NSF100.I use it rather frequently because it's for Race, but there is no particular durability problem. It is possible to use it safely because it does not rust.
for RaceEngine is used for disassembly.It is possible to remove it by hooking a slotted screwdriver etc. without this, but I bought it because there is a possibility of damaging parts.For Race is espe...
It is difficult but useful when the Plug is sticking.
About quality and texture - Excellent quality tool, very happy with the knurled finish on the handle and adjuster.
About the feeling of use - Nice compact tool, was able to use it on the intake side ...
I bought the 1L one, but since I bought the Large type, I needed more Oil at once, so I bought the 2L one.It is as easy to use as the 1L.
About quality and texture - Excellent quality, the surface finish of this tool is very durable and still looks new after a few uses.
About the feeling of use - Threads nice and smoothly onto the flyw...
About quality and texture - Excellent quality, perfect fit and the rubber handle is a nice finishing touch.
About the feeling of use - It handles the high torque loads placed on it with easy.
Produc...
This magnetic dish and magnetic pick up tool set from Kitaco is such a great tool set for the money. Was packaged very well and delivered promptly from Webike. I use both these tools regularly in the ...
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
I bought this for my first Bore up work on my SUPER CUB 50FI 3-speed AA01.Purchased at the same time as the upper waist version.The illustrations were so detailed that even a novice like me could unde...
I bought this for my first Bore up work on my SUPER CUB 50FI 3-speed AA01.It was explained in a way that even a layman like me could understand it. The instructions are well illustrated, and the handl...
[How is it used?Earth lock on a pillar in the motorcycle storage area of Apart.How was your experience with it?It's very heavy, so it's not easy to handle.I don't think I need to tell you about the pr...
What made you decide to buy?AKRAPOVICExhaust System has been installed with Torx screws as standard for security, but it was previously installed with PREMIUM ZONECap bolt collar, I bought and install...
I don't see how you can wait until February next year when the shipment is delayed.I can't cancel it because it's a debit card. I don't understand why the shipping is so slow in the first place and on...
PartsThey're pretty effective against theft, aren't they?It is good Point that there are two kinds of Bolt and Nut side.However, depending on the mounting part, you may have to buy both, so it's not v...
The Kitaco SERVICE MANUAL for CRANKCASE is worth it's weight in Gold. The information in it is transferable to ANY horizontal Honda style engine. Printed in Japanese with more than enough English capt...
With PC18, there is quite a bit of space between the OEMAir cleaner and the carburetor.At that time, this funnel or joint is used to connect the OEMAir cleaner and the carburetor.good pointYou will be...
This is the MiniatureSize Shock absorber Key Holder and it is very cute and stylish. The design is well made and will be loved by car and motorcycle lovers.
 | ||
| |
Good manufacturing accuracy and easy installation.The Helmet hooking position is too low when in use.I was a little concerned, but it is not inconvenient to use.
The mounting position is a little high, so when the Helmet is lowered, it doesn't interfere with the Chain, Tire, Frame, etc. Very nice product!
CROSS CUB, the OEM Helmet holder, was difficult to use in the RrFender section, so I removed it and moved it to the Side Mirror Base section, so the empty space was lonely...I wanted to find something...
The OEM Helmet holder of JC92 Grom is too hard to use, so I put it on.I added a RearBOX so I don't get to use it as often as I would like, but it will come in handy when I need it.
No Helmet holder, No Stress, Handlebar installation type.
I put it on my CBR250R.I was able to attach it well by looking at the Instruction Manual.When the key is turned, the Hook descends with the Pattern and can be hooked easily.It's very easy to use.
I bought this because it was hard to get the Helmet into the compartment under the Seat.Installation is easyBecause of the low mounting position, the Helmet is closer to the ground.
On all the Motorcycles I've ridden recently, I've always put a Helmet holder in this position.So I bought and installed it on the for GPZ900R again.The CB400SB was the same, but with a motorcycle with...
Basically, I put the Helmet under the Seat, but if you go shopping or something, this holder is very useful.It was easy to installIt may not be a good idea to leave the Helmet attached to the Holder.
I was able to easily install and remove it from both the Jet and AGB Full face types of Bell and AGB with one touch. Apart from being a bit heavy, it's well worth buying.
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
About our "Mybike" service 
![KITACO [K/TOUR] Porta Capacete](http://global.webike-cdn.net/catalogue/images/85546/80-564-18500_01_TS.jpg)
![KITACO [K/TOUR] Porta Capacete](https://global.webike-cdn.net/photo/impression/d3/d37c94430e7c1ac28e4edd3c5e63c74aM.jpg)
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING