Kawasaki Genuine Parts 14070-1010 Black Breather Cover,14070-1077 Silver Breather Cover
Sobre estas peças, é uma peça que processou a parte de fixação da mangueira da nova tampa do respirador de Z1000J, Z1000J, GPz1100/750 etc., desde cerca de 16mm da forma cónica até 12mm..
A parte de retorno é fixada em 13mm para evitar que a mangueira caia para fora e para permitir que a faixa da mangueira seja fixada..
14mm (15mm na devolução) também está disponível pelo mesmo processamento.. Por favor especifique.
Para motores de prata como Zephyr 750, utilizar 14070-1077 para acabamento em prata..
Por favor escolha o seu favorito.
Já alguma vez teve a experiência de remover o filtro de ar e instalar um tubo de respiração de 16mm de diâmetro interior quando substituiu o carburador?
Penso que é porque é feito por fundição de alumínio e é difícil de retirar do molde a menos que tenha uma forma cónica..
Normalmente, não será um problema, mas quando o redutor é instalado, será ineficaz se se soltar..
Previne a contaminação por óleo de respiração.
KAWASAKI Stock Parts 14070-1010 Black Breather Cover, 14070-1077 Silver Breather Cover
About these parts, the hose attachment part of the new breather cover of Z1000J, Z1000J, GPZ1100 / 750, etc. was processed from 16mm to 12mm of the tapered shape.
The return portion is set at 13mm to prevent the hose from falling out and to allow the hose band to be attached.
14mm (15mm at the return) is also available by the same process.Please specify.
For silver engines such as Zephyr 750, use 14070-1077 for silver finish.
Please choose your favorite.
Have you ever had the experience of removing the air cleaner and installing a 16mm inner diameter breather hose when replacing the carburetor?
This is because it is made of cast aluminum and cannot be removed from the mold unless it is tapered.
Normally, it will not be a problem, but when the reducer is installed, it will be ineffective if it comes loose.
It also prevents contamination by breather oil.