Mudado de pistão único padrão para pistão Brembo 2.
Concebido para a controlabilidade..
O bloco é instalado sem qualquer modificação..
O calibrador interfere com a parte do cubo da roda, existem diferenças individuais, por favor, corte a parte interferente do corpo do calibrador com um triturador, etc..
A placa de disco está deslocada na parte da frente com a cor da figura 2 na imagem 5.
Por favor instalar a carroçaria principal do suporte da carroçaria antes de instalar o compasso, e instalar o compasso após a instalação do suporte..
Por favor substituir a mangueira do travão de acordo com o ambiente da carroçaria do cliente..
Mangueiras de travão, se utilizar a mesma rota que as mangueiras de stock num veículo normal, o comprimento será de cerca de 450mm..
Por favor, instale por si próprio..
Changed from standard single piston to Brembo 2 piston.
It is designed for controllability.
Pads can be installed without any modification.
The caliper will interfere with the wheel hub, there are individual differences, please cut the interfering part of the caliper body with a grinder.
The disc plate is off-set on the front side with the color of Figure 2 in Image 5.
Please install the main body of the support to the vehicle body before installing the caliper, and install the caliper after installing the support.
The brake hose should be replaced according to the environment of the customer's vehicle.
If you use the standard brake hose, the length is approx. 450mm.
Please install the product by yourself.