Multi Mount Bar FE
Product # 94926
113.23 BRL (3,433 JPY)
List price: 131.94 BRL Save 14%
+34 ponto Webike (1.12 BRL)
In stock fabricantes |
Ships around 2nd Apr. 2024? |
Product # 94926
113.23 BRL (3,433 JPY)
List price: 131.94 BRL Save 14%
+34 ponto Webike (1.12 BRL)
In stock fabricantes |
Ships around 2nd Apr. 2024? |
Model Page Links
4 / 5
25 rever
Fits: YAMAHA NMAX155 , YAMAHA NMAX155 17-21 (BV43), YAMAHA NMAX 21 BAL2/SEG6J, YAMAHA NMAX 16-21 (2DS2/BV35,A,E,G)
我的摩托车是YAMAHA NMAX155,我在webike购买了这款DAYTONA多功能把手支架,它固定在原厂后视镜座上很牢固,用M10螺丝固定,管径22mm可以安装手机支架和其他配件,设计简单好用不会影响骑行安全。View Detail
Compared to the Bar type that is mounted near the Mirror, this product allows you to put things in the Center.
Meter is easy to hide.
Holder is easy to contact when Seat is opened.
There are some points to keep in mind, such as
However, if you understand the negatives and choose Holder or Included Parts:, there is no problem.
Rather, it can be said that it is a good product including expandability.
The DT11A is quite Refreshing to look at, if you want to Mirror mount any product.
I have to bulk it up with Adapter to avoid Cowl contact, because the price of Adapter is about $1000.
The total price is the same as other companies' products, and it can be said that it is a good deal if you like Mount under Meter in Total.View Detail
Fits: YAMAHA NMAX155 , YAMAHA NMAX155 17-21 (BV43), YAMAHA NMAX 21 BAL2/SEG6J, YAMAHA NMAX 16-21 (2DS2/BV35,A,E,G)
I bought it because it seems to be able to be installed in VMAX when I measure the size though it is NMAX. there is a little obstacle because there is no product of this type for VMAX, but it is easy to see when I use a smartphone as Navigation. The difficulty may be that it is difficult to see the indicators on the Tank depending on the lighting position.View Detail
Fits: HONDA Forza300 , YAMAHA MAJESTYS 14-18 <2LD1-5>, YAMAHA MAJESTYS 14-16 2LD3, YAMAHA MAJESTYS 14-16 2LD2, YAMAHA MAJESTYS 14-16 2LD1
PCX125 (JF28) When I tried to install the clicker of the smartphone mount to the handlebar, I could not install it because there was not enough room for the shape of the handlebar and clearance.
So I bought this one to install a clicker.
Clicker:https://www.webike.net/sd/24189214/
[How is it used?
In use.
Was the one you received as per Image?
It was just as Image.
The texture is appropriate for the price.
The rigidity is also sufficient.
Was the installation difficult?
It was very easy.
How was your experience with it?
I was able to fix the clicker with no problem.
It's been in place for about a month, but the Screw hasn't loosened, and it's fixed.
[Included Parts:were they on?
It was attached properly.
[Was there anything that disappointed you?
Nothing in particular.
Other items that would be helpful
Point and hang of installation
It was only to remove the screw under the front of Master Cylinder which is easy to access, and to bite the Adapter there.
It is more efficient if you tighten the screw on the Mount bar side a little first so that it doesn't bran.
It takes less than 10 minutes to Bolt On, but you will need a Hexagonal Wrench and a Hexagonal Spanner.
[Availability and clarity of the Instruction Manual
Instruction Manual is attached properly.
I can kind of tell just by the product.
[Notes]
In this kind of product, the paint often peels off from the part where Gold genus and Gold genus touch each other, and RedRust occurs from there. I don't see any sign of it after a month or two, but I think it will last a long time if you spray it with Rust Stopper from time to time.
The Mount Bar Body is the same, but the Bracket Only is different.
If you don't mind a little Gap, or if you use a Universal Bracket from Home center or 100 yen, you can install it on various cars.View Detail
Fits: YAMAHA Tricity155 , YAMAHA BirdCity 2CM9
[How is it used?
Purchased for installation on a Minor vehicle rather than on a BirdCity
Also, I was going to make my own Bracket from the beginning, so "Ease of installation. has been omitted.
Was the one you received as per Image?
I don't have BirdCity, so it's a mystery to me whether it's the same as the Image from BirdCityUser's point of view.
Was the installation difficult?
Because Mirror hall was far away, I made a wide bracket for Bird City and a wider bracket.
Other than that, there are no other special difficulties. I just envy those who have a car model specific product.
How was your experience with it?
It was installed securely without any strange wobbles.
[Included Parts:were they on?
Pipe and Bracket Only.
[Was there anything that disappointed you?
I've used it before on other vehicles, so it's what I expected. It didn't exceed my expectations.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Por favor seleccione a opção antes de adicionar ao seu carrinho.
Serviço ao cliente
ORDENS
EM FORMAÇÃO
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.