[Partes componentes]
1. Lâmpada de nevoeiro fica
2. cabeça de botão de tensão
3. máquina de lavar
4. argola
5. colarinho com cuspo
6. espacejador
7. porca (como em porca e parafuso)
8. parafuso de cabeça de tomada
9. cor
[Especificações da lâmpada de nevoeiro]
Iluminação máxima : 4000cd
temperatura de cor : 6400K
Consumo nominal de energia : 8W(1pc)
consumo de corrente : Aprox. 1A por unidade
requisitos de produção : 0.5h (quando a lâmpada e a estadia são instaladas ao mesmo tempo)
*Fixar o veículo numa superfície plana para evitar a sua queda antes de iniciar o trabalho.
*Desligar o terminal negativo da bateria antes de iniciar o trabalho.
*O acessório eléctrico máximo que pode ser ligado à fonte de alimentação do acessório principal da unidade principal é 2A.
*Para evitar danos nos cabos, prestar atenção ao seguinte.
Tenha cuidado para não dobrar os fios ou deixá-los presos em outras partes.
Não encaminhar perto de peças que se tornam altas temperaturas.
Verificar se a cablagem não é puxada quando o volante é rodado totalmente para a esquerda ou para a direita.
*Não sobressair os garfos dianteiros. A luz de nevoeiro pode interferir com o pára-lamas frontal.
*Antes de montar, certifique-se de que não há folga ou guizo em qualquer parte do veículo.
*Para limpar o kit de lâmpadas de nevoeiro, usar um detergente neutro e lavá-lo com água usando um pano macio ou esponja. Após a lavagem, limpar o poço de água com um pano macio.
*Não aplicar água de uma máquina de lavar carros de alta pressão directamente à superfície.
[Component parts]
1.Fog lamp bracket
2. Bolt button head
3. Washer
4. Grommet
5. collar with brim
6. Spacer
7. nut
8. Socket head bolt
9. color
[Fog lamp spec.]
Maximum illumination: 4000cd
Color Temperature: 6400K
Rated power consumption: 8W (1pc)
Current consumption: Approx. 1A per unit
Man-hours: 0.5h (when the lamp and bracket are installed at the same time)
*Secure the motorcycle on a flat surface to prevent it from falling before starting work.
*Remove the negative terminal of the battery before working.
*The maximum electrical accessory that can be attached to the main accessory power supply is 2A.
*To prevent damage to the wiring, pay attention to the following.
・Be careful not to bend the wires or get them caught in other parts.
・Do not route near parts that become high temperature.
・Check that the wiring is not pulled when the steering wheel is turned fully left or right.
*Do not stick out the front forks.The fog lamp may interfere with the front fender.
*Before riding, make sure that there is no looseness or rattling in any part.
*To clean the fog lamp kit, use a mild detergent and wash it with water using a soft cloth or sponge.After washing the motorcycle, wipe off the water well with a soft cloth.
*Do not direct water from high pressure bike wash machine.