cor : cromado
[material]
Manusear : aço (material)
Mangueira de travão : aço inoxidável
O [conjunto inclui].
Manusear
Cabo de Exterior Negro Throttle W
Cabo de embreagem Black Outer
Mangueira de travão (Aço Inoxidável Completo)
[tamanho do guiador]
Altura total : 150mm
Largura total : 650mm
Largura efectiva da peça de montagem do suporte : 120mm
Tamanho do Pullback : 220mm
Ângulo de inserção : 32 graus
Ângulo de inclinação para a frente : 61 graus
*O conjunto da pega consiste na pega e nos cabos/mangueiras que necessitam de ser substituídos. Por favor, preste atenção às partes necessárias separadamente.
*É necessária uma tampa lateral para cabo de aço com diâmetro interior de 18mm separadamente.
*O furo do interruptor deve ser maquinado.
*[Partes necessárias separadamente]
Isto é necessário quando se estende o arnês.
Arnês de extensão 300L HD1068
*O acelerador, a embraiagem e o travão precisam de ser substituídos. (Não em stock).
*O arnês pode ser instalado com arnês normal. Pode ter de ser remontada.
Color: Chrome plated
[Material]
・Handlebar: Steel
・Brake hose: Stainless steel
[Set components]
・Handlebar
・Throttle W Black Outer Cable
・Clutch Black Outer Cable
・Brake Hose (Full Stainless Steel)
[handlebar size]
・Total height: 150mm
・Total width: 650mm
・Effective width of the holder mounting part: 120mm
・Pullback size: 220mm
・Insertion angle: 32 degrees
・Forward leaning angle: 61 degrees
*Handlebar set is a set of handles and cables / hoses that need to be replaced.Please note the parts required separately.
*Side caps for steel handlebar inner diameter 18mm are required separately.
*Machining of the switch hole is required.
*[Parts required separately]
This is required when extending the harness.
Extension harness 300L HD1068
*Throttle, clutch and brake need to be replaced. (Stock not available)
*The harness can be installed with the stock harness.Routing needs to be replaced.