Aço cromolítico (Placa de 3 camadas)
[Instalação]
*O eixo é um componente crítico.
Por favor, certifique-se de que pessoal qualificado faz os trabalhos de instalação na loja profissional.
Por favor, faça-o utilizando a ferramenta adequada à forma da cabeça do eixo.
É riscada na película de revestimento que é aplicada na superfície do eixo, causando ferrugem se se apertar com uma ferramenta inadequada.
Por favor, pulverizar massa lubrificante na superfície do eixo antes de instalar.
Normalmente não causa ferrugem da própria haste porque está a aplicar o "processo de revestimento de três camadas" do KOOD original na superfície da haste. É causado pela diferença de potencial metálico, para evitar a ferrugem do rolamento da roda, etc.
Por favor, observe os valores especificados pelo fabricante para o torque de aperto.
Favor confirmar porca para veículos a serem montados utilizando porca OEM.
Certifique-se de usar uma nova porca quando for vista na porca, tal como arranhões causados por quedas e parte da função de auto-travamento. Isto é para evitar danos na parte roscada do eixo.
[Sobre a qualidade do produto]
Relativamente à gestão de produtos, fabrica e gere num sistema perfeito, mas por favor contacte-nos antes de trabalhar, se por acaso tiver problemas.
*Em qualquer caso, não podemos responder a reclamações e produtos devolvidos após o trabalho (tal como a passagem do eixo através da roda) em absoluto.
Sobre a ferrugem
"KOOD made shaft" foi submetido a "processo de revestimento de revestimento de três camadas".
Tem um forte processamento de revestimento em comparação com o revestimento de chapa normal. Pode enferrujar dependendo da situação de utilização, mas não tem importância para a qualidade.
É "enferrujar" .... ferrugem dos passeios exteriores na superfície do chapeamento
Ferrugem de transição. Ferrugem externa na superfície revestida
Danos no revestimento.... Utilização incorrecta de ferramentas, degraus ou quedas durante a condução, etc.
*A ferrugem não está coberta pela garantia.
Obrigado pela sua compreensão.
* Ele contém outras partes da foto.
* Observe que as especificações do produto podem sofrer alterações devido a razões do fabricante.
[Material] Chromoly steel (3-layer plating finish)
Without plating nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.