716.25 BRL
(21,715 JPY)
655.92 BRL
(19,886 JPY)
(8% OFF)
3 (6 Todos os Comentários)
Average
Wire broke and it did not open..The opening and closing mechanism broke in about two years. One moment suddenly ceased to open.
Disassembled and examined it, the wire that moved the mechanism of Tilt's Stopper part was out.
I searched the part of that part with Net but it was not found, it was not 0. Purchase 8mm Wire and Aluminum Crimp (About 300 yen for both?).
I installed and repaired while adjusting Wire length. Decomposition is not too much trouble.
It is hard to understand that the Screw of the Red PUSH part is on the back of the Center's Red stripped.
However, since it is mechanically pulling fairly forcibly, it seems that it will be readily available..
In particular, in the OEM state, we use the round Crimp for Crimp, this circle Crimp is also added to the Center part in the Red PUSH Button, and it is running.
Because the round Crimp was not available in this repair, because the WireCenter part is passing through the part of the pla as it is, it seems to be damaging here.
It would be nice to get only this PUSHParts.
Either way, the whole is made Large miscellaneous.
I am not going to recommend it, but I think that it is excellent Items of Cost performance for those who can maintain themselves.
Most Viewed Reviews Of LS2 Modular Helmets
Very Good
If only the distortion of VisorThere's some Visor distortion and it's intoxicating, if only it weren't for that it would be a 95!
Size, as you say, one size higher is better
I am a CUBT, ARAI is a S Size and this one is a M At first, it still felt small, but now I'm used to it and it fits perfectlyView Detail
Very Good
Unique and functionalThe design is great and can be used as a full face or as a Jet
As for the size, I've been using SHOEI's Size XL for my size
The same size XL is very tight
It will reduce somewhat as you get used to it
However, when the Chin guard is in the Full face state with the Chin guard closed, the movable part of the Chin guard Tighter
It feels pretty tight
Cheeks are also compressed by the Chin guard, so your lips are "3" to
The interior standards may be for Europe
The other one I have is the SHOEI JCruise, but I just got used to the flawed interior
This may be the reason why I made this Helmet feel so tight
The air intake is in one place, so it's not as cool as it should be
The mirrored exterior reflects the sunlight and it doesn't get very hot
And if it's hot, all you have to do is raise the Chin guard
This is a slightly negative review, but the personality and design are excellent! I thinkView Detail
Average
Pretty smallI always wear the S Size Helmet
I've been using OGK/SHOEI until now
All sizes are S Size, but this Helmet is quite small. 1SizeLarge You should buy the kimeView Detail
Excellent
It's a nice design that you don't often seeI actually measured the circumference of my head and it was LSize in Limit, but I dared to buy the XL! In the Manufacturer's website, it was recommended to use 1 Size Smaller I'm not a fan of this bag, but it's pretty tight and I personally made the right decision to buy the 1 Size Large texture Because the entire interior can be removed and attached, you can wash and maintain a comfortable condition was also a deciding factor Actually using it, it is much lighter than it looks, and the burden is less I felt that Wind Cutting sound was small and the synthetic leather part of the interior was of high quality Shield looks thick and strong, but there is no distortion in sight It is very good, and the Inner Visor open/close click is also good and moderateView Detail
Very Good
System helmet【What made you decide the purchase?】 Design and functionality. As for Helmet who used before, since Mirror Visor got scratched on the outside, I was looking for Inner Visor's System helmet.
【How was it actually used?】 Compared with the previous Helmet, it is Large and heavy. Just Inner Visor I guess I can not help it..
[Is there anything I was disappointed about?] It is still Large Kiso. I am 174 cm - It's fairly large print with 77 kg, but it still looks big head.
Later, the attached Smoke's Inner Visor is not useful at all, so we recommend purchasing an optional Mirror Visor.
【Hope for Manufacturer - Please let me know if there are any improvement points】 I think that it is good if you can choose the type of Inner Visor at the time of initial purchase.
【Have you compared items?】 Kabuto Valer
[Others] Inner Visor can be put in and out without any problem Smooth and opening and closing of the Helmet is also no problem. Design can be Simple too.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING